Power Amplifier Crown LPS2500

Price Rp4,650,000.00
Availability In Stock
Item Number 0035 Posted under ,

Crown LPS 2500

Product Overview

The LPS Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All three models in the series are powerful, rugged and reliable. They are suited for applications such as churches, concert tours, stages, disco, pubs, or any place that requires amplifier installation.

Product Details

Powerful. Reliable. Affordable.

The LPS Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All three models in the series are powerful, rugged and reliable. They are suited for applications such as churches, concert tours, stages, disco, pubs, or any place that requires amplifier installation.

The three models in the series are the LPS-800LPS-1500 and LPS-2500. They are identical except for output power.

Features include XLR inputs, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference. Every LPS Series amplifier is backed by a one-year limited warranty.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown LPS Series. They are a powerful argument for quality and value!

For more details about the LPS Series, contact your authorized Crown distributor.

 

Minimum Guaranteed Power
per channel, both channels driven
LPS800 LPS1500 LPS2500
1 kHz with 0.5% THD
Stereo, 2 ohms (per ch.)
Stereo, 4 ohms (per ch.)
Stereo, 8 ohms (per ch.)
Bridge-Mono, 8 ohms
Bridge-Mono, 4 ohms

300W
150W
600W

450W
250W
800W

725W
550W
1,450W

Features

  • Stereo/parallel/bridge-mono mode
  • Efficient forced-air cooling prevents excessive thermal buildup
  • Electronically balanced XLR inputs; binding post and Speakon ® outputs
  • Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
  • Protection against shorts, no-load, on/off thumps and radio-frequency interference

Specifications

Sensitivity (for full rated power at 4 ohms)
1.25 V rms
Frequency Response (at 1 watt)
40Hz – 20kHz, +0dB/-3 dB
Signal-to-Noise Ratio (below rated power, 20Hz – 20kHz, A-weighted)
>100 dB
Total Harmonic Distortion (THD)
<.5%, 20Hz – 20kHz
Intermodulation Distortion (IMD) (60Hz and 7kHz at 4:1 from full rated output to -30dB)
<.3%
Damping Factor (8 ohms, 10Hz – 400Hz)
>300
Crosstalk (below rated power)
at 1kHz: -76 dBat 20kHz: -58 dB
Input Impedance (nominal)
20 kilohms balanced, 10 kilohms unbalanced
Load Impedance (Note: safe with all loads)
4 and 8 ohms in stereo mode, 8 ohms in bridge-mono
AC Line Voltage and Frequency Configurations Available (±10%)
120VAC/60Hz220VAC/50Hz240VAC/50Hz
Ventilation:
Flow-through ventilation from front to back
Dimensions: Width, Height, Depth
EIA Standard 19 inches (48.3cm) rack mount wide, 3.5 inches (8.9cm) high, and 15.2 inches (38.6cm) deep
Net Weight, Shipping Weight
LPS800: 20.9 lb (9.5kg), 24 lb (10.9kg)LPS1500: 22.9 lb (10.4kg), 26 lb (11.8kg)LPS2500: 29.8 lb (13.5kg), 32.8 lb (14.9kg)

No reviews yet. Add yours!

Your Review

 
error: Content is protected !!