Paket Pro Sound Groundstack Array Logic System
( Small to Medium setup )
Sistem terdiri dari :
- 4 Unit : Speaker Line Array Logic System
- 2 Unit : Subwoofer Pasif Logic System
- 1 Unit : Mixer Soundcraft
- 1 Unit : Speaker Management DBX
- 1 Unit : Equalizer Grafis DBX
- 1 Unit : Power Amplifier Crown Audio
- 1 Unit : Power Amplifier QSC
- 1 Set : Mic Wireless Sennheiser
- 2 Unit : Stand Speaker
- 1 Lot : Kabel Mic & Kabel Speaker
Solusi sistem tata suara portabel skala menengah berkualitas premium untuk berbagai aplikasi seperti :
– Portable DJ
– Atrium Mall
– Auditorium (dengan dimensi ruangan memanjang ke belakang)
Desain solusi sound system ideal berstandar kualitas tinggi dan tepat guna dari kami untuk anda.
Speaker Line Array Logic System
- Frequency Response: 100Hz – 20kHz (With assisted alignment)
- Components: Bass/mid: 1 off 8″ neodymium cone drivers ,HF: 2 off 1″ exit neodymium compression driver
- Power Handling: 250w (Per Cabinet)
- Sensitivity (1): 103dB (Minimum two box configuration)
- Directivity: 90 x 20 above 1kHz
- Impedance: 16 Ohm
- Construction: 15mm Birch plywood
- Finish: Water based textured black paint
- Connections: 2 x Neutrik NL4 connectors (1+/1- input 2+/2- n/c )
- Dimensions: 505mm (W) x 255mm (H) x 300mm (D)
- Packaged Dimensions (2): 640mm (W) x 680mm (H) x 420mm (D)
- Weight: 15 KG
Subwoofer Passive Logic System
- Frequency Response: 40Hz – 150Hz
- Components:
- Bass: 2 x 15″ cone drivers
- HF: N/A
- Power Handling: 2000w
- Sensitivity (1): 102dB
- Directivity: Omni-directional
- Impedance: 4 Ohm
- Construction: 18mm Birch plywood
- Finish: Water based textured black paint
- Connections: 2 x Neutrik NL4 (Main input:) 1+/-bass, 2+/- CA input 1 X Neutrik NL4 (CA output:), 1+/-, 2+/- NC
- Note: CA output fed from main input 2+/-
- Dimensions: 505mm (W) X 780mm (H) X 600mm (D)
- Packaged Dimensions (2): 635mm (W) X 930mm (H) X 730mm (D)
- Weight: 57 KG (Dolly: 8 KG)
Mixer Soundcraft
Features:
- 12+2 channel frame size
- Built-in 24 bit Lexicon digital effects processor
- 32 effects settings
- Tap tempo and effects setting store function
- One effects send on each channel
- One configurable auxiliary bus
- XLR-type and 1/4″ metal jack connector sockets
- RCA phono stereo playback inputs and record outputs
- 3-band EQ with a swept mid on mono inputs
- 3-band EQ on stereo inputs
- TRS insert sockets and inserts on all mono inputs
- Ten-segment LED output metering
- Intuitive and comprehensive solo system
- Headphone output
- Easily rackmountable
Speaker Manajemen DBX
Features:
- Feedback elimination
- 2.7 seconds of Alignment and Zone Delay
- RS-232 PC GUI control
- Classic dbx Compression and Limiting
- Graphic and Parametric EQ
- Auto-EQ function
- Full Bandpass, Crossover, and Routing configurations
- Auto Gain control
- Pink Noise Generator and fulltime RTA
- Set-up Wizard with JBL speaker and Crown Power Amp tunings
- Security lockout
- Wall Panel Control inputs
Equalizer Grafis DBX
Features at :
- 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of +/-6 or +/-12dB
- 12dB/octave 50Hz low-cut filter
- Front panel bypass switch
- +/-12dB input gain range
- 4-segment LED ladders for monitoring output level
- XLR and TRS inputs and outputs
- Frequency response of <10Hz to >50kHz
- Dynamic range of greater than 108dB
- Weight: 6.2 lbs.
- Dimensions: 3.5″ x 6″ x 19″
Power Crown Audio
Features:
- An affordable and reliable power amplifier you can use in any PA system
- 2,700-watts in bridged-mono mode, up to 1350-watts stereo/parallel operation
- Includes both unbalanced RCA and balanced XLR input connectivity
- Binding post and speakON output connectors let you use virtually any passive PA speakers
- Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear
- LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier
- Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life
- Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless conditions
Power Amplifier QSC
FEATURES
- 8 ohms, Stereo Mode, Both Channels Driven: 800W
- 4 ohms, Stereo Mode, Both Channels Driven: 1300W
- 2 ohms, Stereo Mode, Both Channels Driven: 2000W
- 70V 20Hz-20kHz +0/-0.3dB 0.5% THD: 1500W
- 8 ohms, Bridged Mono Mode: 2800W
- 4 ohms, Bridged Mono Mode: 4000W
- Rear panel gain controls for tamper resistant operation with 2 dB detents for quick and repeatable settings
- XLR and detachable Euro style input connectors
- DataPort V2 for use with DPV2-compatible signal processing accessories (XC-3, SF-3, LF-3) and DSP-3/DSP-4 (with external power supply)
- Independent defeatable clip limiters for reduced distortion
- Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material (30 Hz or 70 Hz)
- Front panel indicators include power, signal, and clip
- Covered barrier strip output connectors for safety agency compliance
- Automatic variable-speed fan for quiet normal operation with maximum cooling on demand
- Rear-to-front air flow keeps equipment racks cool
- Stereo, Bridge, or Parallel operating modes
- Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
- 3-year Manufacturers warranty plus optional 3-year extended service
Mic Wireless Sennheiser
Features:
- An affordable wireless handheld microphone system that provides you with amazing sound quality and reliable performance
- True Diversity reception provides you with worry-free operation
- 24 MHz switching bandwidth with 960 available frequencies, tunable in 25kHz steps
- 8 frequency banks containing 12 coordinated channels each
- Powerful scan function identifies available channels within a bank
- Component synchronization at a distance with Remote Channel sync for convenient onstage setup
- Up to 10 hours of operation with just 2 x AA batteries
- Up to 250′ of dropout-free transmission
- Illuminated audio mute button on transmitter make low-light operation easy
- Balanced XLR and unbalanced 1/4″ outputs for use with a wide range of equipment
- Operates in Sennheiser’s A band (548-572MHz)
No reviews yet. Add yours!
Your Review
You must be logged in to post a comment.