Paket Sound System Line Array EAW
( Medium to Large Outdoor setup )
Sistem terdiri dari :
- 8 Unit : Speaker Line Array Aktif 3 Way EAW
- 2 Unit : Flying Subwoofer Aktif EAW
- 4 Unit : Subwoofer Aktif EAW
- 1 Unit : Mixer Digital Midas
- 2 Unit : Digital i/o box Behringer
- 1 Unit : Rack Case 16U
- 1 Lot : Kabel Mic & Kabel Speaker
Solusi sistem tata suara berdaya output SPL tinggi skala besar berkualitas premium untuk berbagai aplikasi seperti :
– Auditorium
– Lapangan
– Panggung Musik Indoor / Oudoor
Desain solusi sound system ideal berstandar kualitas premium dan tepat guna dari kami untuk anda.
Speaker Line Array Aktif EAW
- Subsystem: Transducer: LF – 1 x 8 in cone, 2 in voice coil; LF/MF – 1 x 8 in cone, 2 in voice coil; HF – 2 x 1 in exit, 1.4 in voice coil compression drivers.
- Loading: LF – Vented; LF/MF – Vented; HF – Horn-loaded
- Operating Mode: Amplifier Channels: Tri-amp LF,LF/MF, HF
- External Signal Processing: DSP w/EAW Focusing™ and DynO™
- Operating Range : 70 Hz to 18 kHz
- Nominal Beamwidth : Horizontal 120° x Vertical 12°
- Calculated Axial Output Limit (whole space SPL) : Average: 122 dB LF,MF, HF / Peak: 128 dB LF,MF, HF
- Input Type : Electronically balanced
- Max Input Level : 21dBu
- Impedance : 20 kOhm (balanced)
- Input Wiring : XLRF, Pin 1 chassis, pin 2 +, pin 3 – separate loop-thru XLRM (for analog signal only)
- Input Selection : Analog, Dante
- Amplifiers & Processing (LF/MF/HF) Type : Modified Class D
- Maximum Output : 3x 500W
- Driver Protection : Integral DSP limiting
- AC Mains (nominal) Connector : Neutrik PowerCon®
- Input : 100 V to 240 V
- Frequency : 50 Hz to 60 Hz
- PowerConsumption : Idle – 26W / Peak Draw – 250 W
- Controls/Communication Connections : 2x Neutrik® etherCON™, RJ-45
- Protocols : Ethernet/Dante
- Software : EAWmosaic™ (available on the App Store)
- Indicators : LCD Screen on amplifier panel for UI, Logo LED (User-definable behavior)
- User Controls : Push-button Rotary Encoder
Flying Subwoofer Aktif EAW
- Subsystem: Transducer: 1 x 12 in cone, 3 in voice coil.
- Loading: LF – Vented
- Operating Mode: Amplifier Channels: Single-amp LF
- Signal Processing: DSP w/ Dyn0™
- Operating Range : 40 Hz to 300 Hz
- Nominal Beamwidth : Horizontal 360° x Vertical 360°
- Calculated Axial Output Limit (whole space SPL) : Average: 118 dB (whole space), 124 dB (half space) / Peak: 124 dB (whole space), 130 dB (half space)
- Input Type : Electronically balanced
- Max Input Level : 21dBu
- Impedance : 20 kOhm (balanced)
- Input Wiring : XLRF, Pin 1 chassis, pin 2 +, pin 3 – separate loop-thru XLRM (for analog signal only)
- Input Selection : Analog, Dante
- Amplifiers & Processing (LF) Type : Modified Class D
- Maximum Output : 1000W
- Driver Protection : Integral DSP limiting
- AC Mains (nominal) Connector : Neutrik PowerCon®
- Input : 100 V to 240 V
- Frequency : 50 Hz to 60 Hz
- PowerConsumption : Idle – 50W / Peak Draw – 1000 W
- Controls/Communication Connections : 2x Neutrik® etherCON™, RJ-45
- Protocols : Ethernet/Dante
- Software : EAWmosaic™ (available on the App Store)
- Indicators :LCD Screen on amplifier panel for UI, Logo LED (User-definable behavior)
- User Controls : Push-button Rotary Encoder
Subwoofer Aktif EAW
- Subsystem: Transducer: 1 x 18 in cone, 3 in voice coil.
- Loading: Vented
- Operating Mode: Amplifier Channels: Single-amp LF
- Signal Processing: DSP w/ Dyn0™
- Operating Range : 30 Hz to 140 Hz
- Nominal Beamwidth : Horizontal 360° x Vertical 360°
- Calculated Axial Output Limit (whole space SPL) : Average: 122 dB (whole space), 128 dB (half space) / Peak: 128 dB (whole space), 134 dB (half space)
- Input Type : Electronically balanced
- Max Input Level : 21dBu
- Impedance : 20 kOhm (balanced)
- Input Wiring : XLRF, Pin 1 chassis, pin 2 +, pin 3 – separate loop-thru XLRM (for analog signal only)
- Input Selection : Analog, Dante
- Amplifiers & Processing (LF) Type : Modified Class D
- Maximum Output : 1000W
- Driver Protection : Integral DSP limiting
- AC Mains (nominal) Connector : Neutrik PowerCon®
- Input : 100 V to 240 V
- Frequency : 50 Hz to 60 Hz
- Power Consumption : Idle – 50W / Peak Draw – 1400 W
- Controls/Communication Connections : 2x Neutrik® etherCON™, RJ-45
- Protocols : Ethernet/Dante
- Software : EAWmosaic™ (available on the App Store)
- Indicators : LCD Screen on amplifier panel for UI, Logo LED (User-definable behavior)
- User Controls : Push-button Rotary Encoder
Mixer Digital Midas
- Live performance and studio recording digital console with up to 40 simultaneous input channels
- 32 award-winning MIDAS microphone preamplifiers
- 25 time-aligned and phase-coherent mix buses
- AES50 networking allows up to 96 inputs and 96 outputs
- Open architecture allows for future 96 kHz operation
- 192 kHz ADC and DAC converters for outstanding audio performance
- Industry-leading design by Bentley* Motors Designer
- High-performance carbon fibre, aluminium and high-impact steel structure
- 40 bit floating point digital signal processing
- 8 DCA and 6 mute groups
- 8 stereo signal processing effects engines
- 25 MIDAS PRO motorised 100 mm faders
- Daylight viewable 7” full colour TFT display screen
- 32 x 32 channel USB 2.0 audio interface
- DAW remote control emulations of Mackie Control* and HUI* protocols
- Optional wireless remote control with MIDAS Apps for iPhone* and iPad*
- Auto-ranging universal switch-mode power supply
- 3-Year Warranty Program*
- Designed and engineered in England
Digital I/O Box Behringer
- 16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality
- 8 analogue, servo-balanced XLR outputs
- AES50 network ports featuring KLARK TEKNIK’s SuperMAC networking capability for ultra-low jitter and latency
- ULTRANET connectivity for BEHRINGER’s P16 personal monitoring system
- Digital audio and control connectivity for TURBOSOUND speaker systems with ULTRANET networking capability
- Dual AES50 ports for cascading additional S16, SD16 or SD8 stageboxes—no merger or router required
- Precise LED metering plus 7-segment displays for signal control on stage
- Dual ADAT outputs providing 16-channel digital output on two optical TOSLINK* connectors
- Phones output assignable to any of the inputs/outputs for on-stage monitoring
- MIDI In/Out for bi-directional communication between BEHRINGER X32 Series console and on-stage MIDI devices
- Remote operation via shielded CAT5e cable up to 330 ft / 100 m length
- USB connector for system updates via PC
- “Planet Earth” switching power supply for maximum flexibility (100 – 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- “Built like a tank” yet compact, all-steel 2U rack-mount chassis
- 3-Year Warranty Program*
- Conceived and designed by BEHRINGER Germany
No reviews yet. Add yours!
Your Review
You must be logged in to post a comment.