Paket Sound System / Pro Audio Meeting Room Proel
Terdiri dari :
Active Speaker PROEL FLASH12A
Input Impedance : LINE: 20 kohm balanced, 10 kohm unbalanced
MIC: 2 kohm balanced, 1 kohm unbalanced
Frequency response : 50 Hz – 20 kHz
Sensitivity : 98 dB @ 1 W/1 m
Input Sensitivity : LINE: 0 dBu / 0.775 V
MIC: max -35 dBu
Low Frequency Device : 12” woofer
High Frequency Device : 1” compression driver Titanium diaphragm
Crossover Frequency : 2000 Hz
Low frequency equalizer : 100 Hz +6 dB, -6 dB shelving
High Frequency Equalizer : 8 kHz +6 dB, -6 dB shelving
Angolar coverage : 90Â° H x 60Â° V
Monitor Taper : 42Â°
Power Supply : 230 VAC 50Hz or 117 VAC 60 Hz
Maximum Power Consumption : 390 VA
Cooling : Natural convection (safety protection 65Â°)
Connectors : IN: combo, XLR F
LINK: XLR M
Construction : injection reinforced hi-density polypropylene
Mounting Pole : 1 x bottom
Flying System : 4 x M10 – top, bottom
Weight : 20 kg(44.100lb )
Dimensions (W x H x D) : 39 x 63 x 36 cm
Controls : mic level, line level, low eq., hi eq., gnd lift
Mixing Console Yamaha MG 82CX
Small but Sophisticated
Many real-world mixing applications only involve a few channels, so a small mixer is the obvious choice. But no matter how simple the setup, you’ll always want first-rate audio quality and processing capability. The MG82CX is the ideal choice for small music production or live sound applications, offering sonic quality that will satisfy the most critical listener, surprising flexibility and ease-of-use, and some advanced features you normally wouldn’t find in this type of compact mixer. So whether you need a compact main mixer, or a secondary utility mixer for a larger application, don’t overlook this performance-packed model.
|Total Harmonic Distortion||Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT)|
|Frequency Response||0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT)|
|Hum & Noise||-128 dBu Equivalent Input Noise/ -100 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum|
|Input Connectors||MIC: 4, LINE: 2 mono + 4 stereo, CH INSERT: 2; RETURN: 1 stereo, 2TR IN: 1 stereo|
|Output Connectors||EFFECT SEND: 1, CH INSERT: 2, REC: 1 stereo, MONITOR: 1 stereo, Phone: 1|
|Crosstalk||-70 dB @ 1 kHz|
|Phantom Power||+ 48 V|
|Input HPF||CH 1-2 and CH 3/4-5/6, 80Hz, 12dB/oct|
|CH EQ (MONO) ±15 dB (Max.)||High||10 k Hz: shelving|
|Mid||2.5 k Hz: peaking|
|Low||100 Hz: shelving|
|CH EQ (STEREO) ±15 dB (Max.)||High||10 k Hz: shelving|
|Low||100 Hz: shelving|
|Compressor (COMP)||Control x 1 (Gain/Threshold/Ratio), CH 1-2|
|Internal Digital Effect||16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off)|
|LED Level Meter / Pre Monitor Level||2 x 7 points LED meter (PEAK, +6, +3, 0, -5, -10, -20 dB) PEAK lights if the signal comes within 3 dB of the clipping level.|
|Peak Indicators||Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu).|
|Power Supply Adapter||PA-10: AC 38VCT, 0.62A, Cable Length = 3.6m|
|Power Consumption||21 W|
|Dimensions (W x H x D)||256.6 mm x 62.2 mm x 302.5 mm|
|Net Weight||1.6 kg|
|Options||Microphone Stand Adaptor (BMS-10A), Foot Switch (FC-5)|
Wireless Microphone AKG WMS 40 Mini2 Vocal Set Dual
- The WMS 40 Mini2 Vocal Set Dual ensures brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.
The SR 40 Mini2 receiver provides three status LEDs each for channels 1 and 2, indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼” output jack.
Each receiver comes with a universal 12-V switched mode power supply with EU, UK, and US adapters. The illuminated ON/OFF button switches both channels on and off simultaneously.
The rugged HT 40 Mini handheld transmitter features an ON/OFF/MUTE switch and a sturdy wire-mesh cap protecting the cardioid dynamic microphone element. Battery life is the same legendary 30 hours off a single AA battery as for the standard WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.
The system includes an SR 40 MINI2 receiver, 2 HT 40 MINI handheld transmitters, a universal power supply with US/UK/EU adapters, and 2 AA size dry batteries.
No reviews yet. Add yours!